MVQ Silicon

MVQ Silicon Get A Quote

Silicon is a rubber (MVQ), which can be used for O-rings, gaskets and special seals. Silicon is an elastomer made from silicon, oxygen, hydrogen, and carbon. The key use of this material is in static seals employed in a wide (-75° F to +450° F) range of temperatures.

This material is not recommended for dynamic situations due to poor abrasion resistance and high friction characteristics. And due to its poor mechanical properties compared to other rubbers, SSP Silicon is mainly used for static applications. It is highly resistant to weathering, ozone and ageing. Silicon also has a high resistance to dry heat, ultraviolet light and ozone. The compatibility with mineral oils depends on the content of aromatic hydrocarbons in the oil.
Click Here for - SILICONE SALMON SSP MSDS PDFDownload SILICONE SALMON SSP MSDS PDF

Quick Contact

Print SILICONE SALMON SSP MSDS Sheet

SSP Manufacturing, Inc.

Phone: 1-908-852-3125     Email: rrom@sspseals.com

Data Sheet for MVQ Silicon(Vinyl Menthyl Silicon Rubber)

Property Specification Value
Hardness ISO 868 85 +/- 5 shore
Modulus 100% DIN 53 504 Greater than or Equal to 580 psi
Tensile strength DIN 53 504 Greater than or Equal to 1015 psi
Elongation at break DIN 53 504 Greater than or Equal to 120%
Tear Strength DIN 53 515 Greater than or Equal to 85%
Specific Gravity ISO 1183 1.58 g/cm3
Rebound Elasticity DIN 53 512 Greater than or Equal to 35%
Compression set ISO 815 Less than or Equal to 8%
70 deg. C / 24h @ 25% deflection
Compression Set ISO 815 9%
100 deg. C / 24h @ 25% deflection
Compression Set ISO 815 N/A
150 deg. C / 24h @ 25% deflection
Min. Service Temperature -76 deg. F
Max. Service Temperature 392 deg. F
Max. Temperature Hot Air (short) 572 deg. F

MVQ silicone is a non-toxic material. Among ozone, sunlight, and high temperatures, it is also resistant to fungal decay. It also has very good cold flexibility. Hence, MVQ seals can be used in high heat as well as food-related applications. Since MVQ silicone has low tensile strength and abrasion resistance, it cannot be used in extremely demanding applications.
This material can be 'FDA Approved' on Request
FDA Approved Seals & Gaskets

News & Events

NOW AVAILABLE FDA COMPLIANT POLYURETHANE

Fda Cfr 21-177.2600 Color: Red Clear Upon Request -13 Deg F To 240 Degree F Hardness 95 & 1-2 Shore A Resistant To: Oil, Petrol, Hot Water, Hot Air, Synthethic And Natives Esters

SSP Manufacturing, Inc

83 Spring Lane, Hackettstown, NJ 07840
+1-888-238-SEAL
1-908-852-3125
1-908-852-3425
rrom@sspseals.com

facebook  twitter  linkedin  google  pin  wordpress

SSP Manufacturing Inc. © 2017. All Rights Reserved.